УФ-лазерная маркировка, автозапчасти будут максимально использовать пластик

Легкий автомобиль стал важным направлением развития автомобильной промышленности, которое не только улучшает ходовые качества автомобиля, но и повышает безопасность автомобиля, экономит затраты на топливо, производственные и производственные затраты и дополнительно удовлетворяет спрос рынка. При проектировании и производстве автомобилей различные производители добивались снижения веса автомобилей за счет широкого применения облегченных пластиковых изделий. Можно сказать, что помимо использования высокопрочных материалов для корпуса, во многих деталях будет максимально использован пластик. Согласно экспериментам, качество автомобиля уменьшится вдвое, а расход топлива также уменьшится почти вдвое.

Интерьер является важной частью легкости автомобиля.

The front and rear bumpers of the car are more typical representatives. In the early years, automobile body bumpers were made of metal. Some were stamped with steel plates and then welded to the body. However, due to factors such as automobile lightweight, mass production and aesthetics, automobile manufacturers finally found A better alternative-plastic bumpers. Plastic bumpers can not only save manufacturing costs, but also have lower requirements on the industrial level and are easier to produce. Therefore, after the manufacturing cost is controlled, it will eventually be reflected in the price of the car.

Exterior decoration is an important part of vehicle lightweight

The lightweight of automotive interior and exterior accessories is an important part of the lightweight of the whole vehicle. With the continuous in-depth research and development of plastic technology, many auto parts have reached the demand for plasticization, including instrument panels, door inner panels, and body covers. Parts, chassis, bumpers, fuel tanks, engine intake manifolds and clutch actuator systems, etc.

Laser cutting plastic nozzles to accelerate the pace of weight reduction

In order to meet mass production, most of these plastic parts are made by injection molding. Injection molding will inevitably produce nozzles. Nozzle refers to the part of the runner produced after injection molding, which is the excess leftover material other than the product, such as the intersection of the mold and the opening of the injection left during the production of the plastic product. These excess scraps need to be cut before assembly.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Laser cutting has become the main equipment

Nowadays, in the cutting of plastic nozzles, laser cutting has become the main equipment. As we all know, the laser cutting machine has very superior precision and accuracy. Because these plastic nozzles have different shapes and sizes, they have higher requirements for cutting. However, if they are manual, the cutting accuracy cannot be guaranteed, and the efficiency is not high, and the speed is slow. Therefore, the laser equipment solves this problem well.